Next generation of personal development
Practice – Stage 1: Initial stage
Stage 1: Initial stage
First stage of MindBooster practice includes three major directions of work: processing general psychological states/emotions, merging dualities, and initial past clearing (with an automatic mechanism “Solvent”). Each direction of work should be done simultaneously. You can launch mechanism “Solvent” at the very beginning, and start working with both lists (extensive list of emotions and list of dualities) every day. All the detailed instructions on your practice will be given later.
This stage is preparatory; it is going to lay the basis for future practice, and reduce the possibility and intensity of recoils in future, so I strongly recommend you not to neglect this part of practice.
Even though the stage is preparatory, results are rather serious and tangible. Usually they appear in an increased clarity of perception, higher self-control and inner harmony. For now, let’s proceed to the practice.
Handlers (installation)
For this stage, you will master the use of our core “operators” – handlers. You are going to use two “handling” mechanisms for practice: “Base Processor” and “Merge”. Handlers have to be “installed” into subconscious, and once they are installed, they can be used whenever you want. There will be one more important handler mechanism, which is not going to be used throughout the practice, but also needs to be installed, called “PIN”. In fact, “PIN” is the most basic, root handling mechanism in our technique and without it MindBooster technique will not work. “PIN” is used in other handlers or automatic mechanisms, it is very simple, it does not dig too deep, and it will never load your brain too much in case you use it. To install handlers, it is usually needed to read its source text once. However, for this book (and for the technique in general) you are going to use another method of installation. Your subconscious will connect to mine to get the contents of handlers. It was made to protect our method from copying, forgery and also to save your time, because original text of “Base Processor”, for instance, takes 10 pages of dull technical text. You are going to understand instructions subconsciously, not consciously. Sounds crazy? There are many theories in the modern science that state that common information field exists and we all are basically connected with each other at some level (or even that we are all part of one). Some psychologists and therapists, who used similar to MindBooster types of processing, were suggesting their patients to get instructions from the paper, which was lying somewhere out of patient’s reach. And in fact, it worked perfectly. This interesting feature also proves that subconscious works in other dimension; therefore, it is not limited by space. However, I don’t have an intention to explain or analyze this phenomenon; what is most important – this approach works, and you will see it really soon.
(For those, who are afraid and think that my subconscious will eat their “brains” or turn them into “zombies”, I will suggest the following: go and watch TV and adverts, and let those eat your brain and turn you into “slaves”J. There is absolutely no point to eat someone’s brain or turn into zombie. These are just stupid beliefs and fears imposed by the modern society and conspiracy theories.)
Also, while reading any mechanisms for subconscious (both handlers and automatic mechanisms), you will notice, that there are no words like “ME” and “I” these are replaced with “WE”, “US”. This is not a mistake and it is aimed to show subconscious that we speak from all of our disintegrated sub-personalities.
Now, let’s install handler “PIN”, other two handlers will be given later with some portions of additional explanations. Just read text below aloud or to yourself from the “instruction start” to “the end of instructions”.
And one more thing, while you are reading this book and performing exercises that will be provided later: follow the instructions directly and very carefully. My group and I went through a lot creating this technique, so I know what I am talking about and care about your success in using it.
Handler mechanism “PIN”
Instruction START
This is the instruction for you, OUR subconscious.
This instruction installs the procedure for material processing “PIN”.
1. You will connect to the subconscious of George Art and download the mechanism “PIN.”
2. From this moment on, when we notice any kind of material that we want to process with this mechanism, we will pronounce or think of a special keyword “PIN” and you will immediately eliminate any charge present in the material consisting of images, emotions, sensations in the body and any combination of them using the procedure "PIN".
All work related to the processing of this material will be done within 15 seconds of earth time, without the harm to our emotional, psychological and physical health or our wellbeing. You will indicate the start of the processing, after pronouncing the keywords defined above with the help of OUR yawning.
OUR subconscious, we thank you for the performed work. You will always follow the instruction above and perform all the processing most effectively and safely. And we highly respect you and are very grateful to you for what you are doing and for being our devoted servant.
End of instructions.
Handler “Base Processor” (explained)
Base Processor” is in fact a huge “processing machine”, which performs many actions, including about 28 processing operations. This means, when you locate a problem and pronounce trigger key word to launch the mechanism, subconscious mind begins a whole bunch of different simultaneous processes, which work on the problem from many different angles. “Base Processor” is a universal tool that can be applied to any type of mental material, having almost no limits, as it can process past episodes, “unwanted thoughts”, emotions, attitudes toward other people, negative traits of behavior, limiting beliefs and so on.
Usually, using “Base Processor” (or other handlers of this type), we locate some problem, which we want to process, verbalize it, showing subconscious mind what exactly we want to process, and pronounce a trigger word “Base Processor” to deal with it. It might look like: “I am unworthy of love – Base Processor” or “this guy pisses me off – Base Processor”. This means, we simply ask subconscious mind to work with an indicated problem by the algorithm, which is described in the instruction of “Base Processor”. Also, this handler is recalled in many other automatic mechanisms. You will see it later, when we take a closer look at automatic mechanisms.
Those who think, that pronouncing negative statements will program their mind to it are totally wrong. We are not working with affirmations; we are performing the elimination of problems and of everything related to them. Repeating those negative states/emotions without giving a trigger word “Base Processor” would be an affirmation. But with a trigger word it becomes elimination, clearing, when negative condition ceases to exist.
I am not going to list all 28 processing operations, which “Base Processor” executes. However, I will describe several important actions that this handler mechanism performs:
-
It eliminates all our “stoppers” and barriers that may arise during the processing. This means, no external or internal factors will block or interfere clearing.
-
It processes the problem itself and divides it into smaller parts, aspects, which are also processed, in order to cover it from all the possible “angles and sides”.
-
It locates all the episodes from the past related to a problem, identifies the time this problem took place and aspects of a problem included at that time, eliminating all that.
-
It identifies and processes all the creatures and beings, which are related to a problem and aspects of a problem.
-
It searches and eliminates all the lessons, negative and limiting beliefs, desires, decisions, feelings, emotions, etc. which are related to a problem and aspects of a problem.
-
It processes all the roles, self-identifications, aspects of personality, which are related to a problem and aspects of a problem.
Again, these are just several primary operations “Base Processor” executes. However, you can get confused of how the division of a problem into aspects may look like (2nd listed operation above). To demonstrate that, let’s take a situation, when someone pisses you off. You decided to process this problem, and pronounced “This guy pisses me off – Base Processor”. The automatic division of a problem into aspects by subconscious mind may look like:
“I hate the way this guy is smiling”
“This guy is an idiot, that’s why he pisses me off”
“He behaves childish, I don’t like it”
And other aspects, the subconscious mind will divide a problem
For the first preparatory stage, we are going to apply “Base Processor” to the list of emotional states and some other psychological states, which are related to our daily life and future practice. You can also apply “Base Processor” for your own daily problems, limitations or other negative conditions; however this part of practice is not obligatory for stage one, and is completely at your discretion. All the instructions on the use will be provided later, for now, you can install “Base Processor”, which is on the next page.
Handler “Base Processor”
Instruction START
This is the instruction for you, OUR subconscious.
This instruction installs the procedure for material processing “Base Processor”.
From this moment on, consider all the previous versions of the mechanism to be invalid and all the processing by the mechanism “Base Processor” to be performed, only by this version of instruction. If any material is being processed by the earlier version of the mechanism, please, transfer it to this version of the mechanism for further processing, from this moment on.
1. You will connect to the subconscious of George Art and download the mechanism “Base Processor.”
2. From this moment on, as we notice any kind of material, which we want to process with this mechanism, we will pronounce or think of a special keyword “Base Processor” and you will perform fully autonomous and automatic procedure of processing, in a background mode, of this material with the help of the mechanism “Base Processor”.
This processing mechanism will be deactivated, and the instruction will expire after all the material available to us has been processed with the mechanism "Base Processor". If necessary, we may temporary suspend processing, by pronouncing key phrase "Base Processor STOP".
All the work related to the processing of this material will be done in 3 days or less of the earth time since the initial activation of this mechanism. Distribution and allocation of processing load on our body will be made as equal as possible, to avoid overloads. The start of the handling mechanism, as well as the stop (after pronouncing the above-defined key phrases), will be indicated by the means of yawning of our body.
OUR subconscious, we thank you for the performed work. You will always follow the instruction above and perform all the processing most effectively and safely. And we highly respect you and are very grateful to you for what you are doing and for being our devoted servant.
End of instructions.
Practice - Emotions processing
This is the first practical part of the initial stage in MindBooster – processing of general emotional/psychological states. Later on, you will find a list of these emotions for processing, which you will need to deal with. How to work with it:
-
Take the first emotion from the list
-
Pronounce aloud or to yourself it with key word “Base Processor” which activates processing (pronounce the whole phrase 5-10 times, or until you start yawning)
-
Example: Estrangement – “Base Processor” (5-10 times or until yawning).
-
Go to the next emotion and repeat the procedure.
-
Don’t worry about the fact of yawning!!! If it doesn’t come just move on to the next one after 5-10 repetitions!!!
Results of this work come on an individual basis. They usually become visible within several hours or several days, depending on individual. Don’t overload yourself here; one-two groups (one group takes one page) of psychological states/emotions per day will be enough. Still, if you want more you can do it at your own risk.
Also, you can try to use “Base Processor” for your daily issues. For example, if you feel sad pronounce (to yourself or aloud): “I feel sad, everything is falling apart – Base Processor” (5-10 times). You can express any problem in any form, wording does not matter. You can also “play” with reasons of problems; for example, pronounce (to yourself or aloud): “I feel sad, because I don’t believe I can be happy – Base Processor” (5-10 times). However, for now this is for you to experiment, I will show how to deal with personal material and problems later.
One more thing about emotions/psychological states below: the list on next pages contains both negative and positive groups of emotions. This is done so, because not only our negative emotions are charged, but also positive have mental material in and related to them. This helps to get stable results and to get closer to inner harmony, which is under control of both negative emotions as well as positive ones. Also, in the end you will find a small list of add-ons, which you should also process. Those are some interesting aspects, related to emotional control. Process them by the "scheme" above.
Handler “Merge” (explained)
As I told before, there is no such thing in nature as dualities. Dualities are the opposite of nature. Take “beginning”, for instance, the duality is an “end” (part of my research group exclaimed, when I asked them) – why do we think of “everything that has a beginning has an end” then? Because these are one process. Duality is totally false mind concept. Dualities, in fact, exist because of a charge, which lies between any two opposite concepts. Therefore, when you eliminate this charge, two concepts get attached to each other and merge automatically. Like magnetic poles, which get attracted to each other naturally. A charge in our case is some barrier that holds them at a distance, like a foreign matter between two poles of a magnet, giving them no chance to get attached.
Merging dualities is an interesting process, which brings a lot of insights and results. It leads to natural harmony, inner peace and sharper multifaceted perception, because by being separated, dualities create a constant discomfort and take our mental resources for sustaining the existence of charge between them. Note that eliminating dualities will not make your logical and moral reasoning suffer. You are not going to become e.g. “maniac or sociopathJ” who can kill or unreasonably hate people.
Merging dualities is a great additional aspect of MB practice. Beside abstract results, it also helps to get rid of many automatisms, patterns of reaction and to increase personal effectiveness. Sometimes it happens unexpectedly, even without using basic parts of MindBooster technique, which are described in this book. That is why we made a decision to integrate an automatic merging of dualities into every automatic mechanism.
I am aware of some traditional techniques, which perform the “elimination” of charge between dualities. However, usually it takes time and concentration to manually perform certain “mechanical” and dull actions. In our technique, the elimination of dualities is performed in an automatic way, with help of “Merge” handler. This automatic tool makes possible to set as many dualities as we want for processing. To use it, you don’t need to concentrate or get “isolated”; you can do it whenever you want, even driving a car. The method is the same as with “Base Processor”, the trigger word “Merge” pronounced with a pair of dualities launches the process of charge elimination.
Here is a brief list of actions, which are performed by our subconscious mind, when a command to process a pair of dualities is given:
-
It evaluates all the characteristics of each duality opposites and finds a peak episode in the past, when those dualities were separated at their maximum.
-
When an episode is found, subconscious mind performs an elimination of charge, which separates those dualities.
-
It eliminates all resistances and fears in us for elimination of charge between those dualities.
-
It locates and eliminates all factors, which create or contribute to the creation of the charge, which separates dualities.
-
It locates the resistance of other creatures, people and beings, who could be against of such merging. Of course, subconscious mind will only perform processing of our illusionary ideas of such resistances. However, this is an important step, because, people are always bounded with illusionary expectations of others.
-
And finally, it processes our expectations of the results of such dualities merging.
In fact, interesting thing is that charge can be found not only between a pair of “common dualities” as good–evil. Any concepts or expressions of internal and external world can be processed as dualities. By that, I mean, concepts, which our mind perceives as opposite or distant. For example, a mind duality could also be: “I am unworthy of success – I am a lucky and a successful person”. This type of duality can also be processed with the help of “Merge” handler. Processing such states, you will notice that you are free to choose any of those states, and you are not stuck in either one or another.
On the next page, you will find mechanism “Merge” for installation. After you install it, you are free to proceed to the list of dualities.
Mechanism “Merge”
Instruction START
This is the instruction for you, OUR subconscious.
This instruction installs the procedure for the material processing “Merge”.
1. You will connect to the subconscious of George Art and download the mechanism “Merge.”
2. When we draw our attention to dualities that we want to process with this mechanism, we will pronounce aloud or think of a special keyword “Merge” and you will perform fully autonomous and automatic procedure of processing, in a background mode of this pair of dualities, until the total neutralization, by using the mechanism “Merge”, is performed.
This processing mechanism will be deactivated, and the instruction will expire after all the material available to us has been processed with the mechanism "Merge". If necessary, we may temporary suspend processing, by pronouncing key phrase "Merge STOP". You will resume the work of the mechanism on the processing, after we pronounce or think of a special keyword “Merge”.
All the work related to the processing of this material will be done in 3 days or less of the earth time since the initial activation of this mechanism. Distribution and allocation of processing load on our body will be made as equal as possible, to avoid overloads. The start of the handling mechanism, as well as the stop (after pronouncing the above-defined key phrases), will be indicated by the means of yawning of our body.
OUR subconscious, we thank you for the performed work. You will always follow the instruction above and perform all the processing most effectively and safely. And we highly respect you and are very grateful to you for what you are doing and for being our devoted servant.
End of instructions.
Practice - Dualities
On the following pages you will find an extensive list of dualities for your practice. How to work with them:
-
Pick the first duality from the list
-
Pronounce (aloud or to yourself) it with key word “Merge” which activates the processing (pronounce the whole phrase 5-10 times, or until you start yawning).
-
Example: absolute – relative – “Merge” (5-10 times or until yawning).
-
Go to the next duality and repeat the procedure.
-
Don’t worry about the fact of yawning!!! If it doesn’t come just move on to the next one after 5-10 repetitions!!!
-
For the first two pages, it would be best to try to “feel” each duality, to “tune a connection between you and your subconscious mind”. It will speed up advancement.
Timeframe to expect results is individual. You might feel results of such work in several hours, or the next day after processing, and some will feel in several days. It depends on how you feel your inner processes; if this feeling not suppressed, results will be coming faster.
Process 25-70 dualities per day to avoid overloads; working with more can cause recoil effect. You can define your own rhythm of work. For some merging 100 dualities a day is fine and for others 20 will be more than enough. So, there are no rigid rules.
In addition to this work, you can play with “Merge” processor, merging yourself with whatever comes to your mind, or merging different opposite concepts or conditions. For example, if you want to get better understanding of someone, you can do the following: “Me-that person – Merge” or “Me – great communication skills – Merge”. Even if this work is not obligatory, those experiments lead to interesting results (if something is disgusting for you, you can “merge” with this object, and it will not bother you that much anymore). In addition, after a while, merging yourself with whatever in the world, you might start feeling that you and the world around are the one. This will bring a more calm and safe state of mind. Examples:
-
Me - that guy – Merge
-
Me – my dog – Merge
-
Me – slow internet – Merge
-
Great results of processing dualities – me – merge =)
Once you are done with your daily practice on dualities, you can proceed to “Solvent” mechanism, which follows the list of dualities and performs basic automatic processing of your past.
Mechanism “Solvent” – Initial past clearing
“Solvent” is a fully automated mechanism, which performs an initial processing of your past. To use it, read it once, aloud or to yourself, and simply launch by pronouncing “Solvent Start” 5-10 times. Mechanism will be performing its work for 15 days in a background mode and it is rather powerful. The amount of processed material with this mechanism is simply immense, so don’t be surprised if for the first several days, you will have strange sensations in your body and strange dreams, which include scenes from the past. Results of this processing will be visible within several days.
There is no need to reread or re-launch this mechanism anytime in the future. The material will not return or “recharge”, so do not perform pointless repetitive actions. There will be more past processing and in future; this particular mechanism “paves the way” to it. It also prepares our body and mind for other automatic mechanisms.
After launching this mechanism, you will notice that processed material is replaced with optimal energy. It is done to reduce the possibility and intensity of recoil effect. You see, one of the reasons for recoil effect to appear is because, when we eliminate some mental material – so-called “hole” appears, in our “mind space”. Over time, this “hole” eventually tightens and stops bothering us, but we make a trick by filling it up with energy, preventing any discomfort this “hole” could possibly cause.
Now you can proceed and launch “Solvent” mechanism.
Mechanism “Solvent”
Instruction START
This is the instruction for you, OUR subconscious.
This instruction installs the procedure for the material processing “Solvent”. From the moment of activation of the procedure described in this instruction after pronouncing, aloud or to OURselves, a special phrase “Solvent Start” you will start carrying out a fully autonomous and automatic processing by the following algorithm:
Starting from the moment of activation of the processing described in this instruction after pronouncing (aloud or to OURselves) a special key phrase ("Solvent START"), you’ll start carrying out a fully autonomous and automatic processing:
You will eliminate by using the mechanism "Base Processor" any kind of resistance to the processing of the material described below, any disbelief in the possibility of such work, and any doubt concerning the results of it, as well as, any kind of fear of this processing; you will eliminate each resistance, disbelief and fear, replacing processed material with optimal energy for us.
In addition, you will process, by using mechanism “Base Processor”, any our desire to influence, by the means of our imagination or habitual behavior, any results of work performed by this mechanism, our expectations and views on how the mechanism should work and what results it should give, replacing processed material with optimal energy for us.
After that, you will process the material in each minute in our life, from our conception, to the last minute of YOUR working on this instruction, by the below described algorithm:
-
For every taken minute you will process the following material with the processor “Base processor”:
-
Each OUR emotion.
-
Each OUR thought.
-
Each OUR feeling in the body.
-
Each OUR visual image.
-
Each sound WE have perceived.
-
Each smell WE have felt.
-
-
If during this minute we contacted any other people or creatures you will process by using the mechanism "Base Processor" any of OUR attitude towards these people or creatures, any information received from these people or creatures and also all decisions or conclusions made on the basis of this information, replacing processed material with optimal energy for us.
-
If by any reason during that minute our personality was divided, disintegrated, you will integrate each separated part of our personality with us by using the mechanism "Merge".
-
When processing of all the material for a given minute is complete, you will move to the next minute of our life, performing processing of the material for this minute from point 1
You will be processing all negative reactions of our body and mind, that can occur during the work of mechanism "Solvent" and can be in form of anger, irritation, apathy, fear, hatred, depression, reluctance to live, disbelief that something has been processed or eliminated, pessimism, headache, high blood pressure, temperature and any other negative emotional and physical states by using the mechanism “Base processor”, replacing processed material with optimal energy for us.
This mechanism will be deactivated, and the instruction will expire automatically after all the material available to us has been processed with the mechanism "Solvent". If necessary, we may temporary suspend processing, by pronouncing a key phrase “Solvent STOP".
You will process the material fully autonomously and automatically for us, both during our sleep and waking state, without causing harm to our sleep and to our functioning in the waking state. The processing of the material will be performed as gently and painlessly as possible. You will also process disbelief in the possibility of such work, and any doubt concerning the results of it, as well as, any kind of fear of this processing, any negative emotions or emotional states, as well as any resistance, we may have in relation to this processing, by the mechanism "Base Processor", replacing processed material with optimal energy for us.
All the work related to the processing of this material will be done in 3 days or less of the earth time since the initial activation of this mechanism. Distribution and allocation of processing load on our body will be made as equal as possible, to avoid overloads. The start of the handling mechanism, as well as the stop (after pronouncing the above-defined key phrases), will be indicated by the means of yawning of our body.
OUR subconscious, we thank you for the performed work. You will always follow the instruction above and perform all the processing most effectively and safely. And we highly respect you and are very grateful to you for what you are doing and for being our devoted servant.
End of instructions.
Supplemental material
Below, you can find everything you need for your further practice, and more, in case you've miss something out.
Each item has detailed descriprion, so you won't get lost.